Stack Emission Monitoring

SPECIFICATIONS:

Stack Gas Temp.

:

Up to 600 degree C A digital pyrometer and 1m
Long thermocouple is provided

Thermocouple

:

Thermocouple is made up of SS 304 Casing, length of insertion: 1.0 m with 2 m long cable with suitable connector.

Monometer

:

Digital with 0-1300 mm of H2O Column.

Pitot Tube

:

S-Type pitot tube fabricated from SS 304, 1.0m length extendable to 2m, individual, calibrated at reference setup of
Lata envirotech traceable to FCRI Palghat.

Particulate Sampling

:

SPM collection in thimble type filter (with pore size of 1.6m with collection efficiency for 0.3n particles 99.7%)

Gaseous Sampling

:

Collections of gases 0.3-3 lpm in chemicals kept in a set of 120 ml capacity borosilicate glass impingers

Rotameter

:

Plastic body rotameter with 2% FSD accuracy, 0-30 lpm for particulate and 0-3 Lpm for gases.

Sampling Probe

:

Made from SS 304 tube, 1.0m length extendable to 2.0m

Filter Holder

:

Fabricated from SS 304 tube suitable to hold either cellulose filtration thimble (size 28 mm ID x 100 mm ling) or glass micro fiber thimble (size 19 mm ID x 90 mm long).

Nozzles

:

A set of 3 stainless steel nozzles of different diameter

Digital Clock

:

0-60 minutes, 1 second readout with start stop and reset functions.

Sampling Tray

:

1 Nos. of 240 ml capacity and 2 Nos. of 120 ml capacity borosilicate glass Impingers. Accommodated in SS ice tray, placed on the rear side of instrument panel with a provision to keep ice.

Vacuum Pump

:

Vacuum Pump Mono block Rotary vane type oil filled, 0.5 HP, Single phase motor (230 V) with 40 lmp free flow capacity.